You just spent real money repainting the house. Now look at the block wall behind it, the patio posts, and the gate. That is what your neighbors actually see.

Block walls need more than paint

Block is porous and it moves moisture. If you see a chalky white residue on the surface, that is salt left behind by water passing through the wall. Painting over it guarantees the coating will fail, because the paint is sticking to powder rather than masonry.

That residue has to be cleaned off and the source addressed, then the wall gets a masonry primer before any color goes on.

Patio ceilings, posts, and beams

These take direct heat and reflected heat off the deck all summer, and they are usually the first exterior wood to fail. Check the underside of beams and the base of posts where water sits. Repair beats repaint every time on these.

Wrought iron and rust

Rust does not stop because you painted over it. It keeps working underneath and lifts the new coating within a season. Rusted areas need to come back to bare metal, then a rust-inhibiting primer, then the finish coat.

Gates, security doors, view fencing, and pool fencing all sit in sprinkler spray, which is why they rust faster here than people expect.

Concrete and pool decks

Decking gets walked on barefoot in July, so heat and slip resistance matter as much as color. Not every concrete coating is appropriate around a pool, and the wrong one gets uncomfortably hot.

Do it while the crew is already there

All of this is cheaper as part of an exterior project than as a separate visit later. The equipment, the masking, and the setup are already paid for.

We paint block walls, patios, iron, and decking across Gilbert and the East Valley. Get a free estimate for the whole property, not just the house.